- 01000502545
-
This email address is being protected from spambots. You need JavaScript enabled to view it.
TSW200
SFP
2 x SFP ports for long-range Fiber-optic communication
PoE+
8 x PoE+ ports with 802.af, 802.3at standard support
POWER BUDGET
Total power budget at PSE up to 240 W
ETHERNET
8 x Gigabit Ethernet with speeds up to 1000 Mbps
TSW200 is an industrial Ethernet switch with 2 SFP ports for long-range Fiber-optic communication and 8 Gigabit Ethernet ports that support IEEE802.af and IEE802.3at Power-over-Ethernet standards. Classified as power source equipment (PSE), it enables the centralization of the power supply, providing up to 30 watts per port and reducing the effort to install power.
| Powering option | 2 pin, push-in, terminal block |
| Input voltage range | 7-57 VDC |
| Input voltage range for PoE | 44-57 VDC |
| Power consumption | Idle: < 2 W, Max: < 9 W (no PoE device connected) |
| PoE standard | 802.3af/at (up to 30 W per port, total power budget - 240 W) |
| Ethernet | 8 x 10/100/1000 Mbps Ethernet ports |
| SFP | 2 x SFP port for Optical interface |
| Status LEDs | 16 x Ethernet, 1 x Power, 2 x SFP activity |
| Ingress protection rating | IP30 |
| Operating temperature | -40 °C to 75 °C |
| Housing | Aluminium housing with wall or DIN rail mounting option and grounding capability |
| Dimensions | 132 x 44.2 x 95.1 mm |
| Weigh | 456 g |
| Installation | Desktop, wall or DIN Rail mountable (additional kit needed) |
| Bandwidth | 20 Gbps |
| Packet buffer | 128 KB |
| Jumbo frame support | 9216 bytes |
| MAC address table size | 2K entries |
| Auto MDI/ MDI-X Cable Detection |
Yes |
There are no reviews for this product.
